Hardinge-UK
Hardinge Inc.
HARDINGE BRIDGEPORT HAUSER KELLENBERGER TRIPET TSCHUDIN


Products
All Products/  Workholding/  FAQ’s/  

Brown and Sharpe

Which collets and feed fingers are standard for #00 & #00G machines? Which collets and feed fingers are standard for #00 Automatic machines with 3/4" Capacity?

Which collets and feed fingers are standard for #0 and #0G Automatics?

Which collets and feed fingers are standard for #2 and #2G Automatics?

Which collets and feed fingers are standard for #2 Ultramatic with 1-5/8" Capacity?

Which collets and feed fingers are standard for #3 Ultramatic with 2-3/8" Capacity?

Which collets and feed fingers are standard for #4 Automatic with 1-7/8" Capacity?

Which collets and feed fingers are standard for #6 Automatic and #4 Automatic with 2-3/8" Capacity?

Which collets and feed finger are standard for #0 Wire Feed Screw Machine?

Which collets and feed finger are standard for #1 Wire Feed Screw Machine?

Which collets and feed finger are standard for #2 Wire Feed Screw Machine?

Which Style B Hardinge pads compare to Brown & Sharpe Style Pads?




 "Which collets and feed fingers are standard for #00 & #00G machines?"

"The #00 Collet (Part #3003), the #00 Feed Finger for 5/16" Capacity Tube (Part #3009), the #00A Feed Finger for 3/8" Capacity Tube (Part #3011) are typical. Also standard are the #10 Collet (Part #3033), the #10 Finger for 3/8" Capacity Tube (Part #3035), and the #10A Finger for 1/2" Capacity Tube (Part #3037) are also typical."

 


 "Which collets and feed fingers are standard for #00 Automatic machines with 3/4" Capacity?"

"The #11C Collet (Part #3071) and the #10AA Finger for 3/4" Capacity Tube (Part #3039) are typical. If using alternate chuck sleeves, use the #11 Collet (Part #3057). If using alternate adapters, use the #10 or #10A Fingers (Part #3035 or #3037)."
 


 "Which collets and feed fingers are standard for #0 and #0G Automatics?"

"The #11 Collet (Part #3057), the #11 Finger for 1/2" Capacity Tube (Part #3061), the #11A Finger for 5/8" Capacity Tube (Part #3063), and the #11B Finger (Part #MP-1727, which is a special) are typical. When using the Outside Feeding Attachment, use the #11C Collet (Part #3071) and the #21A Finger for 3/4" Capacity Tube (Part #3095). With a chuck nut for Taper-Nose collets, use the #11B Collets (Part #MP1727)."
 


 "Which collets and feed fingers are standard for #2 and #2G Automatics?"

"The #22 Collet (Part #3111), the #22 Finger for 1" Capacity Tube (Part #3115), the #22B Collet (Part #3121), and the #22A Finger for 1-1/8" Capacity Tube (Part #3119) are typical. When using the Outside Feeding Attachment: use #22A Collet for 1-5/16" spindle (Part #3117), #22B Collet for 1-7/16" spindle (Part #3121), #22B Finger for 1-3/8" Capacity Tube (Part #MP1557, which is a special), #22C Collet (Part #3125), #22H Finger for 1-1/4" Capacity Tube (Part #3133), #22D Collet (Part #3127), and #22D Finger for 1-1/2" Capacity Tube (Part #3129)."
 


 "Which collets and feed fingers are standard for #2 Ultramatic with 1-5/8" Capacity?"

"The #22D Collet (Part #3127), the #22DD Finger for 1-5/8" Capacity Tube (Part #3131) are typical. With alternate chuck sleeves, use the #11 (Part #3057), or #11C (Part #3071), or #22 (Part #3111), or the #22C (Part #3125) Collets. With alternate adapters, use the #10 (Part #3035), or #11AA (Part #3065), or #22 (Part #3111), or #22H (Part #3133), or the #22D (Part #3129) Feed Fingers."
 


 "Which collets and feed fingers are standard for #3 Ultramatic with 2-3/8" Capacity?"

"The #23 (Part #3153) Collet, or the #23A (Part #3147) Collet; the #23 (Part #3153) Finger for 2" Capacity Tube, #23M (Part #3149) Master Collet and Pads, and the #23M Master Finger and Pads are typical. From sizes 2" to 2-3/8" inclusive, an Outside Feeding Attachment and Stock Loader are used. With alternate chuck sleeves, use the #22 (Part #3111), #22C (Part #3125) or the #22D (Part #3127) Collets. With alternate adapters, use the #10 (Part #3035), #11AA (Part #3065), #22 (Part #3115), #22H (Part #3133), or #22D (Part #3129) Fingers."
 


 "Which collets and feed fingers are standard for #4 Automatic with 1-7/8" Capacity?"

"The #24 (Part #MP1133, which is special) Collet, the #24 (Part #3169) finger, the #24M (Part #3171) Master Collet and Pads, and the #24M (Part #3173) Master Finger and Pads are typical."
 


 "Which collets and feed fingers are standard for #6 Automatic and #4 Automatic with 2-3/8" Capacity?"

"The #26 (Part #3187) Collet, the #26 (Part #3191) Finger, the #26M (Part #3193) Master Collet and Pads, and the #26M (Part #3189) Master Finger and Pads are typical."


 "Which collets and feed finger are standard for #0 Wire Feed Screw Machine?"

"The #10 (Part #3033) Collet, the #10 (Part #3035) Finger for 3/8" Capacity Tube machines are typical
The #10B (Part #MP2330, which is special) Collet and the #11A (Part #3063) Finger for 5/8" Capacity Tube machines are typical."
 


 "Which collets and feed finger are standard for #1 Wire Feed Screw Machine?"

"The #11 (Part #3057) Collet and the #11 (Part #3061) Finger for 1/2" Capacity Tube are typical. The #21 (Part #3089) Collet, the #21 (Part #3093) Finger for 5/8" Capacity Tube and the #21A (Part #3095) Finger for 3/4" Capacity Tube are typical. The #21 (Part #3089) Collet and the #21 (Part #3093) Finger for 7/8" Capacity Tube are typical."
 


 "Which collets and feed finger are standard for #2 Wire Feed Screw Machine?"

"The #22 (Part #3111) Collet and the #22 (Part #3115) Finger for 1" Capacity Tube machines are typical
The #22B (Part #3121) Collet and the #22A (Part #3119) Finger for 1-1/8" Capacity Tube machines are typical
The #22C (Part #3125) Collet and the #22H (Part #3133) Finger for 1-1/4" Capacity Tube machines are typical."
 


 "Which Style B Hardinge pads compare to Brown & Sharpe Style Pads?"

"B&S Style 00M uses the Hardinge B1 Style (Part #6601)
B&S Style 10M uses the Hardinge B10 Style (Part #6643)
B&S Style 10AM uses the Hardinge B10AM Style (Part #6649)
B&S Style 11M uses the Hardinge B3 Style (Part #6611)
B&S Style 11AM uses the Hardinge B11 Style (Part #6653)"
 


Jones and Shipman Hardinge Limited
Murrayfield Road
Leicester
LE3 1UW, England
Tel: +44 (0)116 2013000
©2013 Hardinge Inc. All Rights Reserved.
Hardinge is the leader in providing a wide range of highly reliable turning, milling, grinding and workholding solutions under the brands Hardinge, Bridgeport, Kellenberger, Hauser, Tripet and Tschudin. We never compromise on product design, so customers can count on Hardinge to help them make the right part to the required specification, every time.