Hardinge-UK
Hardinge Inc.
HARDINGE BRIDGEPORT HAUSER KELLENBERGER TRIPET TSCHUDIN


Products
All Products/  Workholding/  Spindle Tooling/  

FlexC Collet Systems for CNC Lathes

Hardinge FlexC Collet System

Vulcanized collet heads provide fast changeover, high accuracy, and a wide gripping range for stock variation. Reduce your setup and changeover time when compared to jaw chucks. Operate at higher feed rates and spindle speeds with the Hardinge FlexC Collet Systems. Systems available for A2-5, A2-6, A2-8 and some flat-back CNC lathe spindles. 



Printer Friendly   Product Brochure   Request Form
 
Key SpecificationsFeaturesDocuments

Vulcanized Collet Heads

  • Round smooth, round serrated, hex serrated, square smooth, S-master and emergency styles
  • Sealed to minimize chips and sludge from entering the spindle
  • Metric capacities from 6mm up to 65mmIndustry-compatible replacement heads
  • Manual wrench for changeover in seconds

Style D FlexC Collet System

  • Thru-hole for bar work (not recommended for chucking)
  • Streamlined, low-profile for less interference
  • A2-5, A2-6 and A2-8 spindle styles
  • 42 and 65mm sizes

Style A FlexC Collet System

  • Pull-back style with removable Dead-length work stop
  • Supports bar work and chucking
  • A2-6, A2-8 and 170mm spindle styles
  • 42, 65 and 80mm Sizes

Style DL FlexC Collet System

  • Push-to-close Dead-Length style
  • Stationary collet (work stop with 42 and 65mm)
  • Ideal for accurate transfer from spindle to spindle
  • A2-5, A2-6 and A2-8 spindle style
  • 42, 65 and 80mm sizes
To request more information,
please e-mail us and include the subject: FlexC Collet Systems for CNC Lathes



Jones and Shipman Hardinge Limited
Murrayfield Road
Leicester
LE3 1UW, England
Tel: +44 (0)116 2013000
2013 Hardinge Inc. All Rights Reserved.
Hardinge is the leader in providing a wide range of highly reliable turning, milling, grinding and workholding solutions under the brands Hardinge, Bridgeport, Kellenberger, Hauser, Tripet and Tschudin. We never compromise on product design, so customers can count on Hardinge to help them make the right part to the required specification, every time.